Products » Electrical » EX Lighting Fixture

Lighting fixture for fluorescent tubesand LED tubes (FLF...)

Lighting fixture for fluorescent tubesand LED tubes (FLF...)
  • ✓ Ex protection: Ex II 2GD Ex d IIC T6 - Ex tD A21 IP 66
  • ✓ Certificate: CESI 09 ATEX 008
  • ✓ Installation: zone 1 - 2 - 21 - 22
  • ✓ Aluminum alloy heads with low copper content
  • ✓ Standard power supply 230V 50/60Hz
  • ✓ Shockproof and temperature-resistant borosilicate glass tube
  • ✓ White aluminum internal frame that works as diffusing reflector also
  • ✓ Neoprene gaskets resistant to acids and hydrocarbons
  • ✓ Silicon resin between glass tube and aluminum heads
  • ✓ 4 Ah or 7Ah, 6V rechargeable batteries
  • ✓ RAL 7035 epoxy coating
  • ✓ Stainless steel screws
  • ✓ manufacturer: cortem group-italy

nLLK Series Non-metallic Fluorescent Luminaires

nLLK Series Non-metallic Fluorescent Luminaires
  • ✓ Class I, Div. 2, Groups A, B, C, D
  • ✓ Class I, Zone 2, AEx nA II
  • ✓ Class II, Div. 2, Groups F, G
  • ✓ For areas with tough environmental demands, low mounting heights and immediate illumination requirements
  • ✓ Two 17W or 32W linear lamps
  • ✓ manufacturer: cooper crouse-hinds

Bulkhead Light Fitting (Series 6388 / 6788)

Bulkhead Light Fitting (Series 6388 / 6788)
  • ✓ Suitable for incandescent lamps up to 100 W and halogen lamps up to 150 W
  • ✓ Through-wiring possible
  • ✓ Ex II 2 G EEx ed IIC T*/6388 (Zones 1, 2)
  • ✓ Certificate: IBExU 03 ATEX 1118
  • ✓ Ex II 3G Ex nA II T*./6788 (Zone 2)
  • ✓ Certificate: IBExU 06 ATEX B035
  • ✓ Rated voltage: 230 V AC and 24 V AC / DC
  • ✓ Degree of protection IP64
  • ✓ Cable entry: 1 x M25 x 1.5 cable gland /1 x M25 x 1.5 stopping plug
  • ✓ manufacturer: stahl-germany

Compact Light Fitting (Series C-LUX 6100 / 6500)

Compact Light Fitting (Series C-LUX 6100 / 6500)
  • ✓ Suitable for wall or ceiling mounting
  • ✓ Can be fitted to order with emergency exit signs
  • ✓ Central locking
  • ✓ All-pole disconnection via N/C switch when cover is opened (Series 6100)
  • ✓ Ex II 2 G EEx eds IIC T4/ 6100 (Zones 1, 21)
  • ✓ Certificate: PTB 97 ATEX 2119
  • ✓ Ex II 3 G EEx n A II T4/ 6500 (Zones 2, 21, 22)
  • ✓ Certificate:SNCH 03 ATEX 3558
  • ✓ Rated voltage: for fluorescent lamps: AC: 220 (- 10%) ... 240 (+ 10%) V; 50 / 60 Hz DC: 198 ... 250 V for DULUX-L lamps: AC: 220 (- 10%) ... 240 (+ 6%) V; 50 / 60 Hz DC: 176 ... 254 V for incandescent lamps: 230 V
  • ✓ Degree of protection IP66 (IP64 with breather 8162)
  • ✓ manufacturer: stahl-germany
  • ✓ manufacturer: stahl-germany

CCH UX Series LED Exit Signs

CCH UX Series LED Exit Signs
  • ✓ Available with Class I, Div. 2, Groups A, B, C, D rating
  • ✓ NEMA 4X; IP66
  • ✓ Used to provide safe exit marking in locations deemed hazardous due to the presence of flammable vapors or gases
  • ✓ Dual voltage 120/277V power supply
  • ✓ manufacturer: cooper crouse-hinds

Lighting fixtures for safety warnings (EVF-18EX)

Lighting fixtures for safety warnings (EVF-18EX)
  • ✓ Ex protection: Ex II 2GD Ex d IIC T5/T6 - Ex tD A21 IP 66
  • ✓ Certificate: CESI 03 ATEX 098
  • ✓ Installation: zone 1 - 2 - 21 - 22
  • ✓ Low copper content aluminium alloy body
  • ✓ Shockproof and temperature-resistant borosilicate glass tube
  • ✓ Standard power supply 230 V 50/60 Hz
  • ✓ Internal and external stainless steel earth screw
  • ✓ Wiring through glass braid silicone rubber cables resistant up to 200°C
  • ✓ Neoprene gaskets resistant to acids and hydrocarbons
  • ✓ RAL 7035 grey epoxy coating
  • ✓ manufacturer: cortem group-italy
Previous  1  2  3  4  5  6  7  8  Next