Fanavar Bargh Golestan | Explosion proof equipment supplier | Products | Instrument

Products » Instrument » Transmitter

✓ Signal output: 4-20 mA 2-wire
✓ Supply voltage: 10-30 VDC
✓ Process connection: 1/2 NPT Male
✓ Electrical connection: DIN EN 175301-803 (DIN 43 650) with 1/2 NPT female conduit plug connector
✓ Pressure ranges from 50 InWC to 15,000 psi
✓ FM, CSA approval for:
✓ Intrinsically safe Class I, II and III Division 1, Group A, B, C, D, E, F, G
✓ Dust Class II and III Division 1, Group E, F, G
✓ Class I, Zone 0, AExia II C
✓ Ex- protection EExia I/II C T6 according to ATEX for:
✓ Gases, vapors and mist: Connection to Zone 0, Zone 1 and Zone 2
✓ Dust: Connection to Zone 20, Zone 21 and Zone 22
✓ Mining: Category M1 and M2
✓ Suitable for SIL 2 according to IEC 61508 / IEC 61511
✓ manufacturer:WIKA

✓ Vacuum to 15,000 psi
✓ Signal output: 4-20mA, 2-wire or 1-5 V 3-wire low power
✓ Supply voltage: 10-30 VDC or 6-30 VDC
✓ (low power version)
✓ Process connection: 1/4
✓ Electrical connection: 1/2
✓ FM-approved explosion-proof for Class I
✓ Division 1 hazardous locations
✓ Available with 4 ... 20 mA, 2-wire or 1 ... 5 V, 3-wire low power output signals
✓ Engineered to withstand harsh environments
✓ NACE MR0175 compliant wetted parts
✓ Retrofits many existing oil and gas applications
✓ manufacturer:WIKA

✓ Vacuum to 5,000 psi
✓ Signal output: 4-20mA, 2-wire or 1-5 V 3-wire low power
✓ Supply voltage: 10-30 VDC or 6-30 VDC (low power version)
✓ Process connection: Non-clogging flush diaphragm G1B or G1/2B (depending on pressure range)
✓ Electrical connection: 1/2
✓ FM-approved explosion-proof for Class I
✓ Division 1 hazardous locations
✓ Available with 4 ... 20 mA, 2-wire or 1 ... 5 V, 3-wire low power output signals
✓ Engineered to withstand harsh environments
✓ NACE MR0175 compliant wetted parts
✓ Retrofits many existing oil and gas applications
✓ manufacturer:WIKA